|
|
To achieve optimum cutting performance,apart from steel grade,the number of teeth as well as the shape of the cutting edge is of great importance.
The geometry of the cutting edge and of the gullet are dependent on the material to be cut and will essentially influence the cutting behavior of a saw.As a solution to your cutting requirements ,we are offering you four different tooth styles: |
 |
Standard Tooth(N)
Rake angle 0:completely rounded gullet.For universal applications to cut small to medium solid cross sections ,tubes ,plates ,contour sawing operations.
|
| |
|
 |
Skip Tooth(Lü)
Rake angle 0°: low tooth height ,flat gullet.Recommended for cutting brittle materials of larger diameter,such as bronze,brass,zinc,aluminum risers,and brittle plastics.
|
 |
Variable Tooth Pitch N and Plus
Toothing with 0° (N) or positive (plus) rake angle:Regular intermittent tooth sequences where the teeth within a group show different tooth pitch ,i.e . greater height .Excessive vibrations will be reduced,with a positive effect on noise level,cutting surface quality,and service life.
Applications for this toothing pattern are universal-ranging from cutting of layers and bundles up to large solid cross sections of a great variety of metallic materials.
|
To achieve free cutting of the bandsaw in sawing operations,individual teeth are deflected alternately shape,and kind of material to be machined.The type of tooth set depends on cross section,from the blade level.
|
 |
Regular or raker setSuitable for sawing all materials where at least 3 teeth will be engaged ultaneously.Range of application starting from 5 mm. |
|
 |
Right-left set
For cutting soft materials(NF metals,plastics,wood)
Group set
|
|
 |
Developed for virtually vibration-free sawing of thin material cross sections ,such as tubes and structural shapes . Due to groups of teeth set at inclined angles within a set sequence , smooth cutting surfaces will be achieved with increased cutting speed. |
|
 |
Wavy set
A special set for delicate material cross sections up to 5mm,e.g. thin-walled tubes,structural shapes,plates,etc. |
|
 |
Variable Tooth set
The groups of teeth recurring over the band length have one or several straight teeth(raker teeth),whereas the remaining teeth are set to the right and left. |
|
|
|
 |
ALIDE SAW INDUSTRY
TEL:0086-020-36360452 Fax:0086-020-36360453
ADD:23# Qingnan Rd, Nanfang Country, Renhe Town, Baiyun District,Guangzhou, China |
|
|
|
